Proactive Environmental Products is proud to engineer the 12-volt Stainless Steel Mega-Typhoon Pump and Low Flow with Power Booster I LCD Controller for low flow purging and sampling of groundwater monitoring wells. The ruggedly constructed, yet compact, all Stainless Steel Mega-Typhoon is capable of pumping from a depth of 80 feet. The modular design allows for field replacement of the motor module in less than 60 seconds. Each Stainless Steel Mega-Typhoon Pump is shipped with an extra motor module and motor housing top connector wrench.
Runs off of a 12-volt car battery
Perform low flow sampling as low as 10 ml per minute, from any depth, using the Low Flow with Power Booster I LCD Controller!
Digital controller display allows you to fine tune the pump flow rate! The heavy-duty NEMA 4 enclosure incorporates a 30-amp reverse polarity protection circuit, current limitation circuitry, and thermal overload protection. The controller’s Constant Voltage Regulation (CVR) Technology boosts the 12-volt power supply to 19 volts; supplying the Stainless Steel Mega-Typhoon with a constant 14 volts. This technology provides for the pump’s high performance. The digital controller display allows you to fine tune the pump flow rate to as low as 10 ml per minute at any depth.
Computer engineered bottom debris filter screen minimizes the passing of sand, small rocks, and debris reducing clogging or damage to the motor!
Long-lasting, high performance pump motor lasts over 500 hours under normal conditions!
By simply removing the motor housing top connector and turning the motor module one-quarter turn, the worn motor module is easily removed and replaced allowing the user to continue with the sampling task at hand.